Categories
-
Products
- Sinks & Basins
- Drains & Wastes drainers
- Mixers & Faucets
- Speedfit
- Fittings
- Pedestals & Chairs
- Electric Struts
- Tv Lift
- Teak wonder
- Igloo coolers
- WATER FILTERS HYDROPURE
- Kayak
- Railblaza
- Pompe
- Bussole Ritchie
- Expansion tanks
- WASTE BIN
- Others
- Outlet
Viewed products
-
Thrust 100 Kg
Fast electric struts for translation...
Thrust 100 Kg
Fast electric struts for translation
1000 N – Speed 36 mm/sec – Push-pull
Available with strokes from 100 to 2900 mm
Cylinder, piston and brackets in anodized light alloy.
- Struts with a high translation speed (36 mm/sec), therefore suitables for long strokes, but not to lift loads.
- The struts are equipped with an adjustable magnetic end of stroke.
- Available as a pair.
- Supplied with an electronic control box for each strut to control, protect against the overloads and 1.30 m power cable.
- On request version with adjustable magnetic end of stroke.
- It's necessary to add a 3 positions switch with automatic return to the OFF state.
- An acoustic movement warning is available on request.
- Available for 12 or 24VDC power.
HIGH SPEED VERSIONS: Ideal for handling structures with long stroke due to their high travel speed, not suitable for lifting.
It is essential that long struts are properly incurred if positioned horizontally to prevent flex. Equipped with magnetic limit.
ENCODER: Struts for installation in pairs, equipped with encoded electronics and control unit to obtain a perfect synchronization, even when subject to different loads. It is possible, where permitted by law, to store up to four different and independent end positions, pre-set by the user at the time of installation, selectable with just a short press of a single button. Can also be used individually when such a precise movement is required, defining a different points of start and end of stroke. Come with backlit push button control and programming. Optional extension cable of 2 - 5 or 8 m.
Available with strokes from 100 to 2900 mm.
| Item | Mounting | Push | Synchro | Stroke | Volt | Weight |
Code |
| 709701/F/12 | push-pull | end of stroke | 970 mm | 12 | 5 Kg | 09.64.09701 | |
| 709701/F/24 | push-pull | end of stroke | 970 mm | 24 | 5 Kg | 09.64.09702 | |
| 714701/F/12 | push-pull | end of stroke | 1470 mm | 12 | 09.64.14701 | ||
| 714701/F/24 | push-pull | end of stroke | 1470 mm | 24 | 09.64.14702 | ||
| 719701/F/12 | push-pull | end of stroke | 1970 mm | 12 | 09.64.19701 | ||
| 719701/F/24 | push-pull | end of stroke | 1970 mm | 24 | 09.64.19702 | ||
| ES709701/12 | push-pull | encoder | 970 mm | 12 | 09.68.09701 | ||
| ES709701/24 | push-pull | encoder | 970 mm | 24 | 09.68.09702 | ||
| ES709701/2/12 | pair | push-pull | encoder | 970 mm | 12 | 12 Kg | 09.70.09701 |
| ES709701/2/24 | pair | push-pull | encoder | 970 mm | 24 | 12 Kg | 09.70.09702 |
| ES714701/12 | push-pull | encoder | 1470 mm | 12 | 09.68.14701 | ||
| ES714701/24 | push-pull | encoder | 1470 mm | 24 | 09.68.14702 | ||
| ES714701/2/12 | pair | push-pull | encoder | 1470 mm | 12 | 09.70.14701 | |
| ES714701/2/24 | pair | push-pull | encoder | 1470 mm | 24 | 09.70.14702 | |
| ES719701/12 | push-pull | encoder | 1970 mm | 24 | 09.68.19701 | ||
| ES719701/24 | push-pull | encoder | 1970 mm | 12 | 09.68.19702 | ||
| ES719701/2/12 | pair | push-pull | encoder | 1970 mm | 12 | 09.70.19701 | |
| ES719701/2/24 | pair | push-pull | encoder | 1970 mm | 24 | 09.70.19702 |