< back Manual

Home ProductsPedestals & ChairsChair pedestalsManual10800

10800

One handle manual chair pedestal

––––––––––––––––––––––––––––

10800/32

Without plate or slide

Reference: 08.40.10320

––––––––––––––––––––––––––––––––––––––––

10800/A

With universal plate (A) 00100

Reference: 08.40.10001

––––––––––––––––––––––––––––––––––––––––

10800/B

With plate (B) 00101 suitable for our chairs

Reference: 08.40.10002

––––––––––––––––––––––––––––––––––––––––

10800/C

With universal slide (C) 10900

Reference: 08.40.10003

––––––––––––––––––––––––––––––––––––––––

10800/D

With slide (D) 10901 suitable for our chairs

Reference: 08.40.10004

More details

Request information >

More info

Pipes and top plate or slide in anodized light alloy, base in sanded and shined light alloy

Suitable for not particulary fast boats.
A single handle allows to rotate the top and to modify the height.
The careful finish makes it appropriate for all environments.
The plastic bushes inside the pedestal avoid the risk to scratch the surface of the piston.
The top can be rotated at rest over 360°.
When sailing, for safety reasons, the set-up handle must be locked.
Diameter of the base 220 mm. Height between 399 and 599 mm - stroke 200 mm.
The slider (C) can be adjusted, when not occupied, on 190 mm of stroke.
The slider (D) fits our chairs and can be adjusted, when not occupied, on 135 mm of stroke.

Plates and sliders

Click on the link for more info


(A) 00100	(B) 00101	(C) 10900	(D) 10901

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Instructions

Sketch (A)

To rotate the chair:
a) Unscrew of 1/4 turn the handle (1).
b) Turn the chair (2).
c) Lock the handle (3).

Sketch (B)

To lift the chair:
a) Unscrew a few turns of the handle (1).
b) Lift the chair to the requested height (4).
c) Push toward the pedestal the handle (2) and lower it (3) untill it is in contact with the lower tube.
d) Screw in the handle untill is locked (5).
e) If the handle is not in a vertical position, push the button and turn it to the neede position.

To lower the chair:
a) Unscrew a few turns of the handle (1).
b) Push toward the pedestal the handle (2) and lift it (3) along the tube.
c) Lower the chair (4).
d) Push toward the pedestal the handle (2) and lower it (3) untill it is in contact with the lower tube.
e) Screw in the handle untill is locked (5).
f) If the handle is not in a vertical position, push the button and turn it to the neede position.

Categories

10800

10800

Plates and sliders

Instructions

Milan headquarters:

Production unit: