< back Manual

Categories

Viewed products

10800/32

08.40.10320

ONE HANDLE manual chair pedestal
Without plate or slide
Weight 2,25 Kg

WITH FIXED TOP  
––––––––––––––––––––––––––––––––––––––
With universal plate (A) 00100
––––––––––––––––––––––––––––––––––––––––––––––
With plate (B) 00101 suitable for our chairs
––––––––––––––––––––––––––––––––––––––––––––––
With universal slide (C) 10900
––––––––––––––––––––––––––––––––––––––––––––––
With slide (D) 10901 suitable for our chairs
––––––––––––––––––––––––––––––––––––––––––––––

More details

Request information >

Pipes and top plate or slide in anodized light alloy, base in sanded and shined light alloy

  • Suitable for not particulary fast boats.
  • A single handle allows to rotate the top and to modify the height.
  • The careful finish makes it appropriate for all environments.
  • The plastic bushes inside the pedestal avoid the risk to scratch the surface of the piston.
  • The top can be rotated at rest over 360°.
  • When sailing, for safety reasons, the set-up handle must be locked.
  • Diameter of the base 220 mm
  • Height between 399 and 599 mm
  • Stroke 200 mm.
  • The top plate (A) is universal.
  • The top plate (B) fits our chairs.
  • The slider (C) can be adjusted, when not occupied, on 190 mm of stroke.
  • The slider (D) fits our chairs and can be adjusted, when not occupied, on 135 mm of stroke.

 

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Instructions


Sketch (A)

To rotate the chair:
a) Unscrew of 1/4 turn the handle (1).
b) Turn the chair (2).
c) Lock the handle (3).

Sketch (B)

To lift the chair:
a) Unscrew a few turns of the handle (1).
b) Lift the chair to the requested height (4).
c) Push toward the pedestal the handle (2) and lower it (3) untill it is in contact with the lower tube.
d) Screw in the handle untill is locked (5).
e) If the handle is not in a vertical position, push the button and turn it to the neede position.

To lower the chair:
a) Unscrew a few turns of the handle (1).
b) Push toward the pedestal the handle (2) and lift it (3) along the tube.
c) Lower the chair (4).
d) Push toward the pedestal the handle (2) and lower it (3) untill it is in contact with the lower tube.
e) Screw in the handle untill is locked (5).
f) If the handle is not in a vertical position, push the button and turn it to the neede position.