Viewed products
Is a device suitable for the...
99.01.00040
Is a device suitable for the filtration and softening
Warning: Last items in stock!
Availability date:
GENERAL USE REQUIREMENTS
Non-toxic materials, suitable for drinking water, in compliance with the UE “Directive 98/83/EC”.
Control-valve: NORYL.
Frame: painted aluminium/stainless steel AISI 316 L.
Hoses: polyethilene.
Resin tank: glass fiber reinforced polyethilene.
Brine: polystyrene HS-EasyBRINE cartridge with NaCl.
Softening material: strong cationic ion-exchange resin (Na cycle). Volume of the resin 4,5 litres.
Filtering and dechlorination medium: activated carbon block cartridge CB-EC, nominal filtration 10 micron.
Filter housings: reinforced polypropylene, PET.
Remark: the regeneration cartridge HS-EasyBRINE must be changed after every regenaration.
The regeneration ends when all the salt of the HS-EasyBRINE cartridge is consumed.
The average life-time of the filtration CB-EC cartridge is 3-6 months: the life-time depend on the in-let water quality and on the volume of the treated water.
DIMENSIONS 250 x 370 x H 445 mm
WEIGHT 10 kg
WORKING CONDITIONS
Max pressure __________________________6 BAR
Min pressure___________________________2 BAR
Max temperature _______________________45°C
Max Fe________________________________0,1 ppm
CCADRIATIC
Reference: 99.01.00041CB-EC CTO 10 micron Filtration of fineparticles (rust, lime, sand, scales); reduction of chlorine (bad tastes,odours) and chloride pollutants (pesticides, solvents, etc). The average life-time of the filtration CB-EC cartridge is 3-6 months: the life-time depend on the in-let water quality and on the volume of the treated water.
|
EASYBRINE
Reference: 99.01.00042HS-EasyBRINE Specifically formulated for the regeneration of strong cationic resin. To be changed with a new cartridge after every regeneration process. When all the salt of the HS-EasyBRINE cartridge is consumed the resin regeneration process is completed. End cap with antimicrobial flat seal
|
Remark - Adriatic 5 is not a potable water maker: for potable applications use only with safe drinking water.
The volume of the water softened with ADRIATIC 5 depends on the total hardness of the inlet water (the raw water entering the softener). The diagram shows the volumes of treated water at different hardness of the inlet water at 10°f, 20°f, 30°f, 40°f up to 4000 liters after the treatment.
The curves shows the residual hardness at various inlet hardness: on that basis it is possible to operate the regeneration procedure at the preferred residual hardness level. It is recommended to keep the residual hardness below 10°f.